Press brake tools

• What material requirements should CNC press brake tooling meet?

  Oct 23, 2025

  To ensure the durability of CNC press brake tooling, the selection of materials is extremely stringent. Only materials that meet the following requirements are considered high-quality.   1. Wear resistance   This is a basic and crucial material property. During the production process, intense friction occurs between the mold surface and the workpiece. If the material is not wear-resistant, the CNC press brake tools will easily become damaged and fail.   2. Toughness   The working environment is relatively harsh, and the mold must withstand tremendous impact forces. Only strong and tough materials can withstand such impact without breaking.   3. High-temperature resistance   CNC press brake tool operate in high-temperature environments, which can reduce their h...

  Hot Tags : press brake tooling Press brake tools press brake tool CNC press brake tooling

  Read More
• Types of press brake tooling Ⅰ

  Oct 02, 2025

  Now we need to move to the “proper tooling” which means choosing the tool from the catalog which will be good to bend your part or what mainly should be ordered for your production. And to speak about it we need to make a complete brief of tooling types and possibilities. We will try not to base on any tooling system but just the possible geometry of tools and their possibilities for bending.   If you have the beginner level it is reasonable also to make a small introduction to press brake tooling itself and to divide it into the simple following categories:   Bending punch - an upper tool so the tool will be attached directly to the moveable beam of the press brake or upper holder on the beam and will be moved together with the beam. We select punch based on the nece...

  Hot Tags : Z-bending tools punches and dies radius tools Press brake tools press brake tooling

  Read More
• What are the upper and lower tools of the press brake?

  Oct 02, 2025

  What are the upper and lower tools of the press brake ?  Let's see how the tools are classified     1. The press brake tools include L-shaped, R-shaped, U-shaped, and Z-shaped press tools.   2. The upper tool of the press brake has different angles of 90 degrees, 88 degrees, 45 degrees, 30 degrees, 20 degrees, and 15 degrees. The lower tool is generally divided into 400mm, 200mm, 100mm, 50mm, 40mm, 20mm, 15mm, 10mm, totaling 835mm.   3. The lower tool of the press brake has 4~18V double groove and single groove, with different groove widths, as well as R lower tool, sharp angle lower tool, flattening tool, etc.   4. The upper and lower tools are divided into sections and overall: the upper tool is generally divided into 300mm, 200mm, 100mm, 100mm, 50mm, 40mm,...

  Hot Tags : Press brake tools Z-shaped press tools upper tool lower tool

  Read More