guide rail

• Analysis and Solutions to Common Malfunctions of CNC Bending Machines

  May 25, 2025

    一、Mechanical bending machine   Fault 1: The guiding gap between the slider and the guide rail is too large, causing abnormal noise.   This type of malfunction is due to the prolonged use of the guide rail, which has been worn and caused an increase in clearance. It is necessary to check the degree of wear of the guide rail pressure plate, and determine whether to replace the guide rail pressure plate and readjust it to meet the required clearance based on the degree of wear.   Fault 2: Rear gear material transmission failure. The failure of the rear gear material transmission is due to the detachment of the key strip between the transmission shaft and the synchronous belt pulley or the slippage of the synchronous belt.   This type of malfunction requires reasse...

  Hot Tags : guide rail

  Read More